C3604 (two kinds of excellent cut brass)
Alloy number | Characteristic | Use |
C3604
(two kinds of excellent cut brass) | C3604 is said to be two kinds of excellent cut brass and is particularly superior in cover cut characteristics with the brass which raised cutting characteristics by adding lead in brass in materials most suitable for cutting in the brass. The feature is that it is easy to cut cut riyasusanokotodeari, the excellent cut brass according to the name of "the excellent cut" with the cover cut characteristics. Even small power is cuttable and can clean a cutting facing and it is minute and can easily separate the chip, too. In addition, superior properties include weldability, plating characteristics. | Parts, gear, valves such as the precision instrument or clock |
Chemical ingredient
Alloy number | Cu | Pb | Fe | Sn | Zn | Al | Mn | Ni | As |
C3604 (two kinds of excellent cut brass) | 57.0 ...
61.0 | 1.8 ...
3.7 | 0.50 The following | Fe+Sn 0.80% or less | Residue | - | - | 0.20 The following | 0.02 The following |
(percent by weight)
※All the Japanese Industrial Standards "JISH3250"
Chemical ingredient of the cadmium 75 ppm or less brass stick
Alloy number | Name | Chemical ingredient (%) | ||||||
Cu | Pb | Fe | Sn | Al | Zn | Cd | ||
C3604 (CdL) | C3604 | 57.0 ...
61.0 | 1.8-3.7 | 0.50 or less | Fe+Sn 0.80% The following | ― | Residue | 75 ppm
The following |
(percent by weight)
※Our JIS approval product is C3604 square and a rectangle.
Characteristic (reference level)
Alloy number | Quality | Tensile strength
N/mm² | Growth
% | Hardness
HV(5) | Cutting characteristics | The conductivity
IACS % | Machine workability | Bending characteristics | The extruded nature |
C3604
(two kinds of excellent cut brass) | Heat interval
Cold | 408
432 | 37
33 | 128
131 | 94
87 | 22.6 | 95
100 | △
X | 100 |
A note: ◎The X that is ○ suitable △ possibility suitable most is impossible
Manufacturing characteristics (I suppose it to be excellent cut brass = 100) The extruded nature (I suppose it to be excellent cut brass = 100)
Diameter of production range by the cross-section's greatest circumscribed circle
Alloy name | As pushing out | Drawing | ||
Straight angle | Variant | Straight angle | Variant | |
C3604 (two kinds of excellent cut brass) | 70 | 70 | 60 | 60 |
(unit mm)
Production range minimum section and wall thickness by the cross-section
Alloy name | As pushing out | Drawing | ||||||
Straight angle | Variant | Straight angle | Variant | |||||
Area
㎜² | Thickness
㎜ | Area
㎜² | Thickness
㎜ | Area
㎜²
| Thickness
㎜
| Area
㎜²
| Thickness
㎜
| |
C3604 (two kinds of excellent cut brass) | 24 | 3 | 24 | 3 | 27 | 3 | 27 | 3 |
(unit mm)