C2700 (65:35 brass)
Alloy number | Characteristic | Use |
C2700 (65:35 brass) | C2700 has expansibility, and cold-work characteristics are good, and it is high, and I bend it, and the strength is used for a complicated artefact, a deep drawing artefact widely by processing as the nature, the diaphragm nature are good. For a characteristic, a use, As conductivity is good, I am used for an electric appliance material and am used for the heat exchanger of the chemical factory, a steam pot, the heat exchanger material of the air conditioner as a specific thermal conductivity is high. In addition, because there is the characteristic full of expansibility, I can facilitate reducing work and bending and am used for daily necessities, the household articles such as an electric clasp, a case, a writer, the hook of cosmetics. Besides, as there is not low temperature brittleness, even very-low temperature is used, and luster is used in construction materials and various kinds of instruments by beautiful gold. | Electric appliance material, household articles, communication machine, precision instrument parts |
Chemical ingredient
Alloy number | Cu | Pb | Al | Mn | Ni | Fe | Sn | As | Zn |
C2700
(65:35 brass) | 63.0 ...
67.0 | 0.05
The following | 0.02 The following | 0.02 The following | 0.02 The following | 0.05
The following | ― | ― | Residue |
(percent by weight)
※It can be manufactured by cadmium 75 ppm or less in C2700, C2800, C3602, C4641, C6782.
※Our JIS approval product is C3604 square and a rectangle.
Characteristic (reference level)
Alloy number | Quality | Tensile strength
N/mm² | Growth
% | Hardness
HV(5) | Cutting characteristics | The conductivity
IACS % | Machine workability | Bending characteristics | The extruded nature |
C2700
(65:35 brass) | Heat interval
Cold | 348
375 | 58
47 | 88
105 | 30 | 25.6 | 30 | ◎ | 80 |
A note: ◎The X that is ○ suitable △ possibility suitable most is impossible
Manufacturing characteristics (I suppose it to be excellent cut brass = 100) The extruded nature (I suppose it to be excellent cut brass = 100)
Diameter of production range by the cross-section's greatest circumscribed circle
Alloy name | As pushing out | Drawing | ||
Straight angle | Variant | Straight angle | Variant | |
C2700 (65:35 brass) | 70 | 70 | 60 | 60 |
(unit mm)
Production range minimum section and wall thickness by the cross-section
Alloy name | As pushing out | Drawing | ||||||
Straight angle | Variant | Straight angle | Variant | |||||
Area
㎜² | Thickness
㎜ | Area
㎜² | Thickness
㎜ | Area
㎜²
| Thickness
㎜
| Area
㎜²
| Thickness
㎜
| |
C2700 (65:35 brass) | 40 | 4 | 40 | 4 | 48 | 4 | 48 | 4 |
(unit mm)