Homepage of Kaimei copper elongation

　I belong to the line between the heat of copper elongation Division.

 

The line between the heat gives going straight characteristics with the machine called the stretcher, and it is doing the product which has been sent by pushing out to a product.

 

The shape of the product which I handle has many heteromorphic products such as the angle channel,

 

As for the surface wound or dent, dirt, attention in particular is required.

 

　Having been the gladdest while I worked by Kaimei copper elongation for nearly ten years

 

When I was able to repair the size of the product to appointed size by roll correction.

 

I take out flat rasao of the product and I widen an angle and narrow it, and the roll correction is the machine which I open an opening and can close.

 

　A product turned around from a previous process without a certain opening size appointed the customer in the model number appearing.

 

While I did not appear, and size had a hard fight very much, the deadline of the customer approached.

 

The product did not want to do the roll correction from various problems such as wounds very much,

 

I rolled it in the useless material and corrected it. But after all it was not good. I have felt a limit in ability of the roll correction of my own.

 

Therefore, in consultation with the boss, I received various ad buses.

 

Based on the advice of the boss, you change ademonai, the kodemonaito correction jig once again, and change correction speed, correction pressure,

 

I was able to provide just right size while I rolled it while making trial and error in various ways and corrected it.

 

　An idea and the idea that were not thought about came out by power and acting power, the technology that me alone thought about and were studied very much.

 

Can solve a problem by talking with many people,; contributed to the fact, and was at the very limit of it on a deadline, but somehow to a customer

 

I was able to put a product.

 

I heard it from the business of the charge later saying it was saying, "thank you, the saved customer was pleased!".

 

I became very glad that I listened to word of the customer.

 

In addition, I want to do the work that a word of the customer can get from now on.