Employee blog
Improvement of the billet thermometry jig
2019-06-24
Hello! It is kamechi!I went to depths Lake Biwa in the trip of the association blue girl part late last week
I stayed in the wonderful log house in the natural rich forest which was near Lake Biwa in a night
I spend tennis and badminton, the table tennis each playing a game in done facilities and
I did barbecue, bingo meeting, fireworks, UNO and swelled at night
As I spread futon and slept in the character of the river, it was the feeling that I totally performed for a school excursion
I was able to spend significant time being able to interchange with an employee of the same generation with a few opportunities to usually talk about
Well, I introduce the episode of the employee doing pushing out by copper elongation today
I perform pushing out in brass and the aluminum by the Kaimei copper elongation.
I am in charge of an operator by pushing out of the brass, but temperature at the time of pushing out varies according to materials
There is the billet heating up to 700 degrees Celsius or more among them.
I actually measured the temperature of the high temperature billet, but was not able to measure it when I had a thermometer until now and did not approach the billet.
With danger to have to approach to an extruder in addition to being a high temperature,
It took a working hour each time as you must push the stop button of the press.
A photograph was taken using a selfie stick of the carrying a tourist when I walked the town once.
"So unpleasant I can measure the temperature even from the away position if I use that expanding and contracting stick" when I saw it tohiramekimashita.
A shop or the 100 yen uniform shop of the cell-phone went around various shops promptly and looked for the product which looked just good.
An expanding and contracting part becomes cylindrically, and the product which I purchased can actually let the cord of the thermometer go through in that,
It was right a thing as I imaged it.
→ 
With what was able to shorten the measurement time than before when I actually used the thermometer which finished the improvement and measured the temperature of the billet
Because I became able to measure with being separated from an extruder, I came to be able to work safely.
As I felt danger in the real work this time and was able to notice idly, I was able to improve it.
But it becomes natural when I repeat the same work every day.
I change some ways, and work takes its ease dramatically just to change the turn, and a working hour becomes short.
I looked back on own work content and was reminded of it by that it was important to discover waste and danger again this time once.
And a hint has the new idea and idea in various places and scenes.
The inquiry from this!
Look at Instagram by all means!