Homepage of Kaimei copper elongation

 

　I worked on the preparation of the finish packing of the aluminum until now.

 

I pack the product which has been sent to a palette and a case from pushing out,

 

I am going to write that I was improved about the removal of necessary setsufun on this occasion.

 

　I sprayed air on a product on a rack and dropped it below to drop setsufun which attached to a product before each packing work before improvement.

 

Therefore it was necessary to clean after the work and became the useless work. I felt, "I want to reduce trouble of the cleaning" and was improved.

 

　So that "do not lose setsufun in lower" (floor), and it covers the whole rack first first to have gone,

 

I made a wall with corrugated cardboard and nylon and sprayed air,

 

A problem of the rebounding of setsufun and the wall which made are big, and is in trouble in the place when do not use it; had a problem.

 

　Therefore it is the next improvement. I focused on this which "lost a tomboy of setsufun" first of all and was improved.

 

It changed the shape of the back part of the wall to have gone and made a drift part, and setsufun was gathered there.

 

However, a tomboy did not readily disappear. As a result of having thought about a cause, nylon came to the will be a problem conclusion.

 

　Therefore the next talked about "the subject matter as a substitute for nylon", but was troubled a little here.

 

I missed air and was going to reduce rebounding by a blue sheet or clutches in substitution for nylon,

 

Air did not fly and did not go to think that, on the contrary, setsufun came out of the gap.

 

When the idea of the nonwoven fabric was given while I was thinking with a member in various ways and did the result using it well, I was able to be glad very much.

 

　As this was able to solve the problem of the rebounding of setsufun, performed it by progress at the same time; "lower the size of the wall more"

 

It was decided that I could go ahead about this.

 

As there was size of rack itself that the product appeared as such, the wall which covered the whole first resembled it.

 

I changed it to the parts of the top and bottom to be able to fold this, but disturbed still more.

 

I talked with a member about this problem in various ways, but this did not let you readily strain well first, too.

 

　However, this came to be able to solve a problem by using a nonwoven fabric of a while ago.

 

At first downsizing did not readily advance because I had been particular about the shape of the wall,

 

Wall itself is unnecessary? I was able to push it forward fast after an opinion called this appeared.

 

As it was finally covered only a nonwoven fabric, it came to be foldable after the use small and came to be able to easily receive it without taking the place.

 

　The above is improvement contents about setsufuntaisaku. Having performed problem cancellation for setsufun through this improvement of course,

 

I feel that it was good by this improvement most above all that all the members in particular were able to be active all in one body.

 

As the employee who could never participate in an activity was broken so far,

 

I feel that it might be a thing reward above all that was able to do it with the people together.

 

An improvement activity to be able to do noisily wants to can continue with all the members in future.